Administrator Guide > Connection Properties > Hive Connection Properties
  

Hive Connection Properties

Use the Hive connection to access Hive data. A Hive connection is a database type connection. You can create and manage a Hive connection in the Administrator tool, Analyst tool, or the Developer tool. Hive connection properties are case sensitive unless otherwise noted.
Note: The order of the connection properties might vary depending on the tool where you view them.
The following table describes Hive connection properties:
Property
Description
Name
The name of the connection. The name is not case sensitive and must be unique within the domain. You can change this property after you create the connection. The name cannot exceed 128 characters, contain spaces, or contain the following special characters:
~ ` ! $ % ^ & * ( ) - + = { [ } ] | \ : ; " ' < , > . ? /
ID
String that the Data Integration Service uses to identify the connection. The ID is not case sensitive. It must be 255 characters or less and must be unique in the domain. You cannot change this property after you create the connection. Default value is the connection name.
Description
The description of the connection. The description cannot exceed 4000 characters.
Location
The domain where you want to create the connection. Not valid for the Analyst tool.
Type
The connection type. Select Hive.
Connection Modes
Hive connection mode. Select Access Hive as a source or target to use Hive as a source or a target.
Note: The Use Hive to run mappings on a Hadoop cluster mode is deprecated. To use the Hive driver to run mappings in the Hadoop cluster, use a Hadoop connection.
User Name
User name of the user that the Data Integration Service impersonates to run mappings on a Hadoop cluster. The user name depends on the JDBC connection string that you specify in the Metadata Connection String or Data Access Connection String for the native environment.
If the Hadoop cluster runs Hortonworks HDP, you must provide a user name. If you use Tez to run mappings, you must provide the user account for the Data Integration Service. If you do not use Tez to run mappings, you can use an impersonation user account.
If the Hadoop cluster uses Kerberos authentication, the principal name for the JDBC connection string and the user name must be the same. Otherwise, the user name depends on the behavior of the JDBC driver. With Hive JDBC driver, you can specify a user name in many ways and the user name can become a part of the JDBC URL.
If the Hadoop cluster does not use Kerberos authentication, the user name depends on the behavior of the JDBC driver.
If you do not specify a user name, the Hadoop cluster authenticates jobs based on the following criteria:
  • - The Hadoop cluster does not use Kerberos authentication. It authenticates jobs based on the operating system profile user name of the machine that runs the Data Integration Service.
  • - The Hadoop cluster uses Kerberos authentication. It authenticates jobs based on the SPN of the Data Integration Service. User Name will be ignored.
Password
Password for the user name.
Environment SQL
SQL commands to set the Hadoop environment. In native environment type, the Data Integration Service executes the environment SQL each time it creates a connection to a Hive metastore. If you use the Hive connection to run profiles on a Hadoop cluster, the Data Integration Service executes the environment SQL at the beginning of each Hive session.
The following rules and guidelines apply to the usage of environment SQL in both connection modes:
  • - Use the environment SQL to specify Hive queries.
  • - Use the environment SQL to set the classpath for Hive user-defined functions and then use environment SQL or PreSQL to specify the Hive user-defined functions. You cannot use PreSQL in the data object properties to specify the classpath. The path must be the fully qualified path to the JAR files used for user-defined functions. Set the parameter hive.aux.jars.path with all the entries in infapdo.aux.jars.path and the path to the JAR files for user-defined functions.
  • - You can use environment SQL to define Hadoop or Hive parameters that you want to use in the PreSQL commands or in custom queries.
  • - If you use multiple values for the Environment SQL property, ensure that there is no space between the values.
If you use the Hive connection to run profiles on a Hadoop cluster, the Data Integration service executes only the environment SQL of the Hive connection. If the Hive sources and targets are on different clusters, the Data Integration Service does not execute the different environment SQL commands for the connections of the Hive source or target.
SQL Identifier Character
The type of character used to identify special characters and reserved SQL keywords, such as WHERE. The Data Integration Service places the selected character around special characters and reserved SQL keywords. The Data Integration Service also uses this character for the Support mixed-case identifiers property.
Cluster Configuration
The name of the cluster configuration associated with the Hadoop environment.

Properties to Access Hive as Source or Target

The following table describes the connection properties that you configure to access Hive as a source or target:
Property
Description
JDBC Driver Class Name
Name of the Hive JDBC driver class. By default, the Apache Hive JDBC driver shipped with the distribution is considered. You can override the Apache Hive JDBC driver with a third-party Hive JDBC driver by specifying the driver class name.
Metadata Connection String
The JDBC connection URI used to access the metadata from the Hadoop server.
You can use PowerExchange for Hive to communicate with a HiveServer service or HiveServer2 service.
To connect to HiveServer, specify the connection string in the following format:
jdbc:hive2://<hostname>:<port>/<db>
Where
  • - <hostname> is name or IP address of the machine on which HiveServer2 runs.
  • - <port> is the port number on which HiveServer2 listens.
  • - <db> is the database name to which you want to connect. If you do not provide the database name, the Data Integration Service uses the default database details.
To connect to HiveServer 2, use the connection string format that Apache Hive implements for that specific Hadoop Distribution. For more information about Apache Hive connection string formats, see the Apache Hive documentation.
For user impersonation, you must add hive.server2.proxy.user=<xyz> to the JDBC connection URI. If you do not configure user impersonation, the current user's credentials are used connect to the HiveServer2.
If the Hadoop cluster uses SSL or TLS authentication, you must add ssl=true to the JDBC connection URI. For example: jdbc:hive2://<hostname>:<port>/<db>;ssl=true
If you use self-signed certificate for SSL or TLS authentication, ensure that the certificate file is available on the client machine and the Data Integration Service machine. For more information, see the Informatica Big Data Management Cluster Integration Guide.
Bypass Hive JDBC Server
JDBC driver mode. Select the check box to use the embedded JDBC driver mode.
To use the JDBC embedded mode, perform the following tasks:
  • - Verify that Hive client and Informatica services are installed on the same machine.
  • - Configure the Hive connection properties to run mappings on a Hadoop cluster.
If you choose the non-embedded mode, you must configure the Data Access Connection String.
Informatica recommends that you use the JDBC embedded mode.
Observe Fine Grained SQL Authorization
When you select the option to observe fine-grained SQL authentication in a Hive source, the mapping observes row and column-level restrictions on data access. If you do not select the option, the Blaze run-time engine ignores the restrictions, and results include restricted data.
Applicable to Hadoop clusters where Sentry or Ranger security modes are enabled.
Data Access Connection String
The connection string to access data from the Hadoop data store.
To connect to HiveServer, specify the non-embedded JDBC mode connection string in the following format:
jdbc:hive2://<hostname>:<port>/<db>
Where
  • - <hostname> is name or IP address of the machine on which HiveServer2 runs.
  • - <port> is the port number on which HiveServer2 listens.
  • - <db> is the database to which you want to connect. If you do not provide the database name, the Data Integration Service uses the default database details.
To connect to HiveServer 2, use the connection string format that Apache Hive implements for the specific Hadoop Distribution. For more information about Apache Hive connection string formats, see the Apache Hive documentation.
For user impersonation, you must add hive.server2.proxy.user=<xyz> to the JDBC connection URI. If you do not configure user impersonation, the current user's credentials are used connect to the HiveServer2.
If the Hadoop cluster uses SSL or TLS authentication, you must add ssl=true to the JDBC connection URI. For example: jdbc:hive2://<hostname>:<port>/<db>;ssl=true
If you use self-signed certificate for SSL or TLS authentication, ensure that the certificate file is available on the client machine and the Data Integration Service machine. For more information, see the Informatica Big Data Management Cluster Integration Guide.

Properties to Run Mappings on a Hadoop Cluster

The following table describes the Hive connection properties that you configure when you want to use the Hive connection to run Informatica mappings on a Hadoop cluster:
Property
Description
Database Name
Namespace for tables. Use the name default for tables that do not have a specified database name.
Advanced Hive/Hadoop Properties
Configures or overrides Hive or Hadoop cluster properties in the hive-site.xml configuration set on the machine on which the Data Integration Service runs. You can specify multiple properties.
Select Edit to specify the name and value for the property. The property appears in the following format:
<property1>=<value>
When you specify multiple properties, &: appears as the property separator.
The maximum length for the format is 1 MB.
If you enter a required property for a Hive connection, it overrides the property that you configure in the Advanced Hive/Hadoop Properties.
The Data Integration Service adds or sets these properties for each map-reduce job. You can verify these properties in the JobConf of each mapper and reducer job. Access the JobConf of each job from the Jobtracker URL under each map-reduce job.
The Data Integration Service writes messages for these properties to the Data Integration Service logs. The Data Integration Service must have the log tracing level set to log each row or have the log tracing level set to verbose initialization tracing.
For example, specify the following properties to control and limit the number of reducers to run a mapping job:
mapred.reduce.tasks=2&:hive.exec.reducers.max=10
Temporary Table Compression Codec
Hadoop compression library for a compression codec class name.
You can choose None, Zlib, Gzip, Snappy, Bz2, LZO, or Custom.
Default is None.
Codec Class Name
Codec class name that enables data compression and improves performance on temporary staging tables.